• Ics = 100% Icu as per IEC 60947-2
• Suitable for Isolation
• Adjustable overload Ir 0.45 - 1 x In
• Adjustable short circuit Isd 5 - 13 x Ir
• Trip class selection ,Class 5, Class10 & Class 20
• Phase unbalance or Phase Loss
• Type - 2 Co-ordination charts upto 315 kW at 400V
• Front indication LEDs (Ready & temperature rise alarm)
• Breaking Capacity enhancement upto 150kA with a higher capacity upstream (Cascading)
• Adjustable neutral protection - N , N/2, OFF for 4 Pole MCCB
• Reted at 65 C as per motor standards

In addition to Embedded Metering features of Micrologic 6E , the below Motor Application parameters are present in Micrologic 6E - M

1. Overload protection : Ir 0.45 - 1 x In
2. Short circuit protection : Isd 5 - 13 x Ir
3. Ground fault protection : Ig 0.4 - 1 1 x In ( for In = 40A) & 0.2 - 1 X In ( for In >40A) and tg l tON /OFF 0.1 - 0.4s
4. Phase unbalance or Phase loss
5. Trip class selection : class 5, class10, class20 & class30
6. Cooling  fan selection : self cooled or fan cooled motors
7. Iunbalance :10 - 40% of average current and time delay 0.7s (starting) & 1-10s (normal operation )
8. Locked Rotor : Ijam 1-8 x Ir or Ijam can be made OFF and tjam 1-30s
9. Under - Load (under-current ): Iund 0.3 - 0.9 x Ir or Iund can be made OFF and tlong 1 - 200s
10. Long Start IIong 1 - 8 x Ir  or llong can be made OFF and tlong 1 - 200s
11. Neutral : OFF or 0.5 x Ir or oversized neutral standard
12. Front indication LEDs (Ready & temperature rise alarm)
13. Zone Selection lnterlocking (zsi)as standard
14. Fault distinction on the display of trip unit (type of fault , interrupted fault current and faulty phase)